Showing posts with label recycled jewelry tutorial. Show all posts
Showing posts with label recycled jewelry tutorial. Show all posts

Soda Crate Upcycled Tutorial - Soda Crate to Magnet Board - Xmas Countdown Week #4


Soda crates are super-easy to find online and at flea markets and this is another simple upcycle to turn one into an awesome magnet board organization shelf. Makes an especially cool gift for a teenager this holiday season!

(you can also make this with a cork bottom - just use foam under the cork to add stability and thickness for your pushpins!)

you will need : an old soda crate, sheetmetal (available at any hardware store or big box home center), foamboard, glue, sawtooth hangers, glazier points, ruler, drill, bottle caps


Measure the inner area of the bottom section of your crate - note - you can also use a soda crate with one opening and fill the entire area - cut pieces of foam core to fill the inner edge, glue foam core edges together and slide into bottom opening, cut sheetmetal to fit, add glazier points with flathead screwdriver, add sawtooth hangers to back, flatten bottle caps with a mallet

(optional, but I never miss a chance to hammer anything with a mallet - trust me, get yourself a mallet)

glue magnets to back of caps - I added little wood backings that I had from scrap cuttings and screwed my caps to them


To get yourself a soda crate check out these wonderful sellers on Etsy HERE

Upcycled Jewelry Tutorial - Christmas Countdown Week lll - let's make jewelry!



For week 3 of this year's recycled holiday gift countdown let's make some easy, peasy jewelry!

If you are like me you probably have a drawer full of buttons and another drawer filled with those hard non-recyclable (until now) plastic bottle caps.

With some black cording from the craft store and a few metal pipe clamps from the hardware store (my favorite place) you can create some amazing interchangeable (that doing more with less thing again) necklaces you will be proud to give and your friends will be happy to get!

what you need:

some buttons of various sizes
a couple plastic bottle caps
power drill
screwdriver
metal hose clamps
thin black cording or chain


1. drill hole in center of bottle cap 2. thread stack of buttons backward from smallest to largest 3. push both ends of cording into bottle cap and tie off 4. cut off any loose ends (good life lesson here) 5. loosen clamp with screwdriver, insert bottle cap and tighten 6. add cording or thin chain to slot on back of clamp



See more of my recycled tutorials here